/irs/image_bin/x/8292991.jpg)
/irs/image_bin/x/6017887.jpg)
/irs/image_bin/x/9177884.jpg)
/irs/image_bin/x/9255730.webp)
/irs/image_bin/x/8293004.png)
/irs/image_bin/x/9034811.jpg)
/irs/image_bin/x/3527549.jpg)
/irs/image_bin/x/5563772.jpg)
/irs/image_bin/x/4515335.jpg)
/irs/image_bin/x/8521415.jpg)
/irs/image_bin/x/8080957.jpg)
/irs/image_bin/x/7962557.jpg)
/irs/image_bin/x/9086593.jpg)
/irs/image_bin/x/9332242.jpg)
/irs/image_bin/x/8540769.jpg)
/irs/image_bin/x/8280689.jpg)
/irs/image_bin/x/9097510.jpg)
/irs/image_bin/x/9101641.jpg)
/irs/image_bin/x/8402059.jpg)
| Scruton Marine Services | |
| 49 John Street, Port Dover, Ontario, N0A 1N7, Canada | |
| Contact: | MJ |
| Telephone: | Reveal Telephone Number |
| Website: | Visit Website |
Scruton Marine is an international marine brokerage company located in Ontario, Canada. We have over 25 years experience sourcing and selling vessels, engines and equipment. Unlike some brokerages we are also experienced in operating commercial boats, barges, engines, etc. We have an extensive list of sources for all things marine including service providers for surveys, towing, salvage, marine construction, etc.
Current View: All Scruton Marine Services Listings (234) | Irish Sports Boats Listings Only (0)
Used Boats: 234 Adverts Displaying: 1-50
2021 25′ x 6’8 Steel & Aluminum Work Boat w/200 hp Evinrude and Trailer
Price: $50,000 CDN
This is the one you’ve been waiting for!
Steel hull with aluminum pilot house and sole
Draft is 6″
Powered by 200 hp Evinrude E-TEC G2 outboard (2018), 90 hours
Viper prop
Cruises at 25 mph
Electronics: GPS, Direction finder, Depth sounder, Compass
Hydraulic steering
Fuel capacity: 25 gallons
Bilge pump
Comes with new tandem trailer
Located near Port Dover, On... read more 
1988 22′ x 10’10” Zodiac Hurricane MK7 w/Tandem Trailer
Price: $20,000 CDN or best offer
Volvo Penta 41 series diesel engine, test run late fall 2023 (runs excellent)
Boat has foam filled tubes
Boat needs some love
Comes with a tandem trailer – bearings are great, new LED lighting and new tires
Located in Port Dover, Ontario, Canada... read more 
Hydraulic Generator – Mounts on Top of 514 or 5114 gears
12.5 KW
Price: $10,000 CDN
Located in Southern Ontario... read more 
1947 20′ x 6’7″ Classic Chris Craft Custom Runabout c/w Trailer
Price: $72,500 CDN
She’s a head turner in show room condition, all original and only 6 hours on the rebuilt engine!
Seller is just the third owner of this iconic vessel
This vessel is number 166 of only 366 Custom Runabouts made between 1946 and 1949
Draft: 21″
Displacement: 2635 lb
Powered by Original inline Chris Craft, 6 cylinder, 130hp gas engine, SN 87987, with 6 hours on rebuild. Yes, you r... read more 
2022 21′ x 7′ Aluminum Work Boat w/70 hp Suzuki and Trailer
Price: $45,000 CDN
Meet the next great addition to your fleet!
Welded aluminum modified v hull
3/16″ hull
1/8″ sole
1 1/2″ pipe gunnels
2 spud pockets
4′ work platform
Motor is 2022 Suzuki 70 hp, 0 hours, Model DF70ATL
Aluminum prop
Deluxe tiller kit
Located near Port Dover, Ontario... read more 
2010 33′ x 11′ Kanter Transporter Aluminum Landing Craft
PRICE: $130,000 CDN
This is not your average landing craft!
ISO Category C commercial grade build, meets or exceeds Transport Canada, ISO cat C, and ABYC stds/requirements
Heavy hull plating, robust transverse and longitudinal framing plus watertight compartments below the watertight quick draining deck
Powered by 2 Evinrude G2 250 hp motors; Port has under 10 hours since rebuild, Starboard has under 500 hours
Max hp ... read more 
12-71 or 12-92 Tanks and Raw Water Pump w/Extra Impellers
Price: $6,000 CDN for the lot
One tank is set up for keel cooling
The other has a heat exchanger core in it
One rebuilt Jabsco raw water pump
4 new impellers
1 Jabsco impeller for parts
Location: Port Dover, Ontario... read more 
(2) New Jabsco Water Pump Impellers
Price: $600 CDN for the pair (compare at $500 USD each!)
Jabsco part number 2999-0001
Location: Port Dover, Ontario... read more 
6 cyl Marine Perkins Diesel Engine
Price: $4,000 CDN
Transmission, shaft and propeller included
Velvet drive transmission
110 hp
Serial No 136096
Mid 90’s
Located in: Quebec... read more 
2018 180′ x 12′ Floating Bridge or 2 Barges with Ramps
•These custom units were designed as a bridge but could be used as 2 separate barges
•2 Barges – 60′ x 10′ x 3.5′
•3 Ramps – 20′ x 11.6′
•Top deck has 1′ over hang support with gussets
•Ramps: 1 barge has double ramps, 1 barge has a single ramp
•Designed to draw in the middle and lock together for one continuous length
•Materials – deck is 1... read more 
21' x 8' Aluminum Dory/Work Boat - NEW BUILD
â—¦Price: $CALL FOR CURRENT PRICING
â—¦3/16 floor with a 3" sub floor and 3/16 checker plate
â—¦3/16 walls with a 10" wide wash board
â—¦Weighs about 1500 lbs
â—¦Location: PEI, Canada
File Ref W2388... read more 
Pair of Perkins Perama M35 Marine Engines w/Gears
Price:$4k CDN each or $7k CDN for the pair
GRTO from 40 trawler
These engines come with gearboxes, wire harnesses, hour meters and gauges
Approximately 4,000 hours
Recently refreshed with new hoses, caps, engine mounts and raw water pumps
Also includes a new in box twin engine alarm system, used water pumps and other spare parts
Port Engine – Perkins M3 103-15 R782
Type KE 30302J
Serial #27280W (Port), 26991W (Stbd)
Transmission M... read more 
1980’s Rendrag Sectional Barges – Several Available!
20′ x 10′ x 5′ PRICE: $20,000 USD
40′ x 10′ x 5′ PRICE: $27,500 USD
Reasonable offers considered
3/16″ Shell plate thickness
Believed to be early 1980’s construction, but this cannot be confirmed
Location: Missouri... read more 
2008 47’ x 14.6’ x 5’ Steel Model Bow Tug
Price: $400,000 CDN
Built in Port Lambton, Ontario
This tugboat is truckable
Gross tonnage: 18.14 tons
Net tonnage: 13.61 tons
Shell plate thickness: 3/16”
Framing: Tubing
Bulkheads: 3/16”
Headroom: Wheelhouse – 6.5’, Cabin – 7’, Engine room – 7’
Engine: Detroit Diesel 8V71T, 350 hp, 3000 hours
Transmission: Twin Disc MG 5114 3:1 ratio
Generator: 7.5kw Onan
Shaft size: 3&rdquo... read more
2011 Mudcat 8" x 6" Aluminum Dredge $315,000
2011 Mudcat MC-910 Aluminum ENV Suction Dredge
Principal Dimensions and Characteristics
- Custom Built in 2011
- Length Over All: 11.62 m 38.11 feet
- Width: 2.74 m 9 feet
- Height Over All: 2.68 m 8.8 feet
- Draft: 533.4 mm 21 inches
- Floating Clearance: 1.80 m 5.9 feet
- Fuel Capacity: 1,325 liters 350 gallons
Floatation
- Pontoons - (2) Two: 914.4 mm x 812.8 mm x 10.06 m 36 in. x 32 in. x 33 feet
- .25” thick marine grade aluminum formed with Internal Bulkhea... read more 
1990 36' x 9.3' x 4.2' Steel Trapnetter/Minnow Boat
Price: $17,500 USD- NEW PRICE!
•Powered by Chrysler 318, est 50 hours since rebuild
•Velvet drive transmission
•Cruising speed: 10 mph
•Fuel capacity: 50 gal
•GRT:9, NRT: 7
• Location: Ohio... read more 
(2) Timberland 10,000 kg Hand Winches
Price: $Reasonable offers will be considered
Max line pull 10,000 kg
Ser No: 78-12886
Drum size approx: 12″ long x 7″ diam
Each winch weighs 1 ton
Does not come with wire
Located in Eastern Ontario... read more 
Set of RH-LH, 29″ x 30.7″, 6 Blade, 3″ Bore, Nibral, Ellis Propellers (like new), Surface Piercing Propellers
•Price upon request
•Location: Louisiana
File Ref PR2198... read more 
1982 78′ x 23′ – 95 Passenger Steel Tour Boat
Available September 1, 2024
Price: $840,000 CDN
GRT: 140, NRT: 87
Draft 5′
Cruises at 7 -1 0 knots
Powered by (2) Series 60 Detroits, 350 hp, 2006
Gear is Twin Disc
Headroom – Wheelhouse: 7′, Galley/Cabin: 8′, Engine Room: 5.5′
Electronics: Horizon radio, 2 x Garmin GPS, Furuno radar, Garmin direction finder
Hydraulic steering
Fuel capacity: 500 gals (approximate)
Fresh water capacity: 50 g... read more 
New – 18′ x 94″, Dual Console Aluminum Work/Ski/Fishing Boat
Price: $CALL
Sides: 30″
Weight: 1607 lbs
Cargo Capacity: 1400 lbs
Fuel Capacity: 30 gal
Max hp rating: 200
Location: Ontario
Shown with optional stern storage... read more 
Harbormaster Unit – Excellent Condition
Price: $35,000 CDN or best offer
6-71 Detroit Diesel
Allison Hydraulic Gear
Low hours
Very well maintained
12 volt alternator and starter
Keel cooled
Manual leg lift
Unit is still in place on a barge, seller will remove at time of sale
Located in: Port Dover, Ontario... read more
MI 30 Oil Recovery Skimmer $3,500
MI 30 Oil Recovery Skimmer
New Price: $3,500 CDN
Make Morris
Model MI-30
Power pack- Yanmar diesel
320 pounds
Location: East Coast of Canada... read more
1956 220' x 43' x 14' Barge $310,000
1956 220′ x 43′ x 14′ Barge
Price: $310,000 CDN
Max cargo capacity about 4,000 tonnes
GRT: 883
Location: Quebec, Canada... read more 
2022 33′ x 12′ Heavy Aluminum Work Boat
Price:$300,000 CDN
Built BY marine contractors FOR marine contractors!
Transport Canada licensed
Team of 6 Canadian Welding Bureau certified all position welders in a state of the art four season workshop located in Southern Ontario... read more 
38′ x 10′ Russel Brothers Project Boat
•Price: $15,000 CDN
•Molded depth 5.5′, Draft 4′
•Headroom: Wheelhouse – 6.5′, Cabin 6.5′, Engine room 6.5′
•Shaft size: 1 3/4″, 29″ prop
•Cruising speed: est 9 knots
•CAT engine, hours unknown, 200hp
•Twin disc transmission
•Fuel capacity: 200 gallons
•Accommodations: room for 1 or 2
•Brass wheel and throttle
Location: Northern Ontario... read more 
RH, 38″ x 38″, 3 Blade Steel Propeller, 3 1/2″ Bore
Price: $1,750 CDN
Excellent condition
Location: Southern Ontario... read more 
RH, 32″ x ?”, 3 Blade Steel Propeller, 2 1/2″ Bore
Price: $650 CDN
Needs work
Location: Southern Ontario... read more 
RH, 28″ x 32″, 3 Blade Steel Propeller, 2″ Bore
Price: $750 CDN
Good condition
Location: Southern Ontario... read more 
RH, 28″ x 28″, 3 Blade Steel Propeller, 2″ Bore
Price: $1,000 CDN
Location: Southern Ontario... read more
2006 1000 HP Tug/28 ton BP $1,580,000
2006 30.20m x 8.60m x 3.60m 28BP Tugboat
Classification : NK Class
Construction : ABS Grade A mild steel
Port of Registry : Sarawak, Malaysia
Year Built : 2006
Gross Tonnage : 269 tons
Net Tonnage : 81 tons
Length, overall : 30.20 meter
Beam, MLD : 8.60 meter
Depth MLD : 4.30 meter
Draft... read more
2006 CAT Marine C12 Engines (2) $30,000
2006 CAT Marine C12 Engines (2)
•345 hp
•New Engines with 28 hours on them, keel cooled
•Price: $30,000 USD Each
•Located in New York State
File E2720... read more 
New Sectional Barges
Price: CALL FOR PRICING
Built to order sectional barges
Built BY marine contractors FOR marine contractors!
48 Years experience working on the Great Lakes
Specializing in robust heavily framed sectional steel barges built to withstand heavy equipment traffic on deck
Add spuds and hydraulic ramps to load tri-axle dump trucks or other wheeled and tracked equipment
Location: Georgian Bay, Ontario... read more 
25″ x 19″, Bronze Folding Sailboat Propeller, 1 1/8″ Bore
Price: $500 CDN
Location: Southern Ontario... read more 
LH 20″ x 12″, 3 Blade Bronze Hyde Propeller, 1 5/16″ bore
Price: $175 CDN
Needs work
Location: Southern Ontario... read more 
22″ 3 Blade Brass and Steel Propeller – Suitable for Decoration only
Price: $100 CDN
Location: Southern Ontario... read more 
2010 Hi-Tide Boatlift 80,000 lb Capacity
Price: $45,000 USD
Fully dismantled
Owner purchased a larger vessel in 2012
Has been kept in indoor storage
Located in Southern Ontario... read more 
RH 20″ x 16″, 3 Blade Bronze Kennedy Propeller, 1 3/8″ Bore
Price: $200 CDN
Fair condition
Location: Southern Ontario... read more 
LH 18″ x 10″, 3 Blade Bronze Propeller, 1 1/2″ Bore
Price: $150 CDN
Location: Southern Ontario... read more 
RH 20″ x 14″, 3 Blade Brass Kennedy Propeller, 1 1/2″ Bore
Price: $200 CDN
Location: Southern Ontario... read more 
RH 16″ x 10″, 3 Blade Bronze Propeller, 1 1/4″ Bore
Price: $150 CDN
Location: Southern Ontario... read more 
LH 15″ x 12″, 3 Blade Bronze Propeller, 1 3/8″ Bore
Price: $140 CDN
Location: Southern Ontario... read more 
RH 19″ x 16″, 3 Blade Steel Propeller, 1.5″ Non-tapered Bore
Price: $150 CDN
Location: Southern Ontario... read more 
Hamilton Gear Works Capstan - 6000 SLP
c/w On/Off control
3 hp 550v
Located in Montreal, Quebec
Price: $2,000 fob Montreal, Quebec
Reference No. WH2096... read more
CAT MARINE ENGINE 400 hp $39,000
CAT Marine Engine
•Price $39,000 CDN
•1200 hours (original not rebuilt)
•400 hp @ 1800 rpm
•3:1 ratio
•Twin end front end
•Manual clutch
•Removed from a small tug
•Located in: Nova Scotia... read more 
RH 32″ x 32″, 3 Blade Michigan Propeller, 2.5″ Bore
Price: $1,500 CDN
Needs a bit of work
Location: Southern Ontario... read more 
RH 38″ x 32″, 4 Blade, Michigan Workhorse Propeller, 3.5″ Bore
Price: $7,500 CDN
Good used condition
Location: Southern Ontario... read more 
48" x 36"
3 blade
Stainless Steel
5" bore
Located in South Carolina... read more
1928 26.5' Steel Replica Tugboat $19,950
1928 26'6" x 8' x 3.6' Steel Replica Tugboat
27' tugboat replica
Boat was originally a lifeboat on a Great Lakes ferry, so has hardly ever been in the water.
All supporting and historical documents will be supplied to buyer at time of sale.
Original boat is constructed of 1/4" steel
Original hull is galvanized at waterline
Stern section and wheelhouse were professionally added and are constructed of 1/8" steel plate
Original hull is riveted and was built... read more 
33' X 10' Workboat With Winch
Cummins motor
Fitted with a winch
Located in Quebec
Price: $13,250 CDN... read more /irs/image_bin/x/9323693.jpg)